High Torque Long Shaft Clock Movement Mechanism Wall Quartz Clock

• Clock parts kit: high torque I shaft clock with metal hook, the shaft can drive long clock hands (10 mm to 450 mm), suitable for repairing, replacing or making a clock
• SA0856 SA1036 SA1054: Clock mechanism size: total shaft length is approx. 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches); Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panelSA1026 SA1035 SA1053: Clock mechanism size: total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inch); Jump second movement, suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel
• Clock hands kit: package includes 2 pieces of minute hands and 2 pieces of hour hands, easy for installation; Simple and elegant design, these replacement parts suit well to different styles of clock frame
• Hole center to the tip hand size: the hour hands are approx. 90 mm/ 3.5 inch and 93 mm/ 3.7 inches respectively, minute hands are approx. 120 mm/ 4.7 inches and 127 mm/ 5.0 inches, the second hand is approx. 100 mm/ 3.9 inches, second heads is approx. 7 mm/ 0.28 inches
• Warm note: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before purchase

1.Please don't install the brass hex nut too tight.

2.Please don't put the second close nut in wrong position.

1.Please carefully check if there is anything missing.

2.Small parts. Not suitable for children under 3 years old.

Measure the thread shaft of the old clock mechanism, if the length is shorter or equal to 15.4 mm, then our product is suitable for your clock.